Shenzhen Bicheng
Electronics Technology Co., Ltd

# Call Us Now ! Tel : +86 755 27374946

# Order Online Now ! Email : info@bichengpcb.com

 PCB Coating Board
 PCB Coating Board
Videos
  • Rogers RT/Duroid 6002 PCB
    Rogers RT/Duroid 6002 PCB

    Rogers RT/duroid 6002 microwave material was the first low loss and low dielectric constant laminate to offer superior electrical and mechanical properties essential in designing complex microwave structures which are mechanically reliable and electrically stable.

  • F4B High Frequency PCB
    F4B High Frequency PCB

    F4B(PTFE base) is a reliable alternative RF materials for antenna, filter and power amplifier. It is Wangling's high frequency material which has advantages in price and stableness in quality.

  • RT/duriod 6035HTC high frequency PCB
    RT/duriod 6035HTC high frequency PCB

    Rogers' RT/duriod 6035HTC high frequency PCBs are ceramic filled PTFE composites. The thermal conductivity is almost 2.4 times the standard RT/duriod 6000 boards, and it's ED copper or reverse treat copper has excellent long term thermal stability. So 6035HTC circuit boards are an exceptional choice for high power RF and microwave applications.

  • RT/duriod 5880 High Frequency PCB
    RT/duriod 5880 High Frequency PCB

    RT/duriod 5880 high frequency PCBs are designed for exacting stripline and mmicrostrip circuits. With glass microfiber reinforced PTFE composites, it has the lowest electrical loss in the reinforced PTFE composites, low moisture absorption and is isotropic.

  • RO3035 High Frequency PCB
    RO3035 High Frequency PCB

    Rogers RO3035 PCBs are ceramic-filled, PTFE based high frequency circuit boards. Its expansion coefficient is matched to that of copper, which allows the PCBs to exhibit excellent dimensional stability.

  • RO4350B High Frequency PCB
    RO4350B High Frequency PCB

    RO4350B high frequency PCBs are made of hydrocarbon ceramic laminates which are designed to offer superior high frequency performance and low cost high volume applications. They are not PTFE that can be manufactured using standard epoxy/glass (FR-4) processes. It has dielectric constant of 3.48,dissipation factor of 0.0037 at 10 GHz. Low dielectric tolerance and low loss allows applications with higher operating frequencies.

    A total of

    2

    pages

© Copyright: 2022 Shenzhen Bicheng Electronics Technology Co., Ltd.. All Rights Reserved.

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #