Shenzhen Bicheng
Electronics Technology Co., Ltd

# Call Us Now ! Tel : +86 755 27374946

# Order Online Now ! Email : info@bichengpcb.com

20 mil RO4003C PCB
20 mil RO4003C PCB
Blog

Some Resons For Using RT/duroid 5870 Printed Circuit Board

  • August 17. 2022

RT/duroid 5870 Printed Circuit Board


Hello everyone,

Today, we’re going to talk about high frequency PCB built on RT/duroid 5870 laminates.


RT/duroid 5870 is glass microfiber reinforced PTFE composite of Rogers Corporation, which is designed for exacting stripline and microstrip circuit applications.


Rogers 5870 PCB


There’re some reasons for using RT/duroid 5870 material.


The first one is lowest electrical loss among reinforced PTFE materials. RT/duroid 5870 PCB has a low dielectric constant of 2.33 and 0.0012 low dissipation factortestedat 10Ghz. Its low dissipation factor extends the usefulness to Ku-band and above.


The next is low moisture absorption.Since it’s PTFE properties, it doesn’t absorb water,the moisture absorption is as low as 0.02%.It’s ideal materials for high moisture environments.


Thirdly, the randomly oriented microfibers result in exceptional dielectric constant uniformity. The DK is uniform from panel to panel and is constant over a wide frequency range.


Lastly,It is isotropic and designed for microstrip and stripline applications.


For RT/duroid 5870 PCBs, we can provide you with single layer board RT/duroid 5870 PCB, double layer board, multi-layer board and hybrid types. RT/duroid 5870 PCBs have wide thickness.These are the standard thicknesssuch as 10 mils RT/duroid 5870 PCB, 15 mils, 20 mils, 31 mils and 62 mils etc.


5870 PCB Capability


Finished copper on PCB is 1oz and 2oz. Our maximum PCB size on high frequency materials is 400mm by 500mm, it can be a single board in the sheet and also can be different designs in this panel.


Solder mask of green, black, red and yellow etc is available in house. There’s immersion gold, HASL, immersion silver, immersion tin and bare copper etc. for surface finish.


In our lives, we can see more applications in commercial airline broadband antennas, microstrip and stripline circuits, millimeter wave applications, radar systems, point to point digital radio antennas etc.


RT/duroid 5870 PCBs offer high frequency with low dielectric constant loss. They are well suited for high frequency/broadband applications where dispersion and losses need to be minimized.


Bicheng devote to supplying PCBs over 18 years with stable and strict quality gurantee, which service cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millimeter wave equipment, radar system, digital radio frequency antenna and other fields wordwide. We are mainly providing high frequency PCBs which built on 3 high frequency material brands: Rogers Corporation, Taconic and Wangling. Dielectric constant ranges from 2.2 to 10.2 etc.


© Copyright: 2024 Shenzhen Bicheng Electronics Technology Co., Ltd.. All Rights Reserved.

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #