Shenzhen Bicheng
Electronics Technology Co., Ltd

# Call Us Now ! Tel : +86 755 27374946

# Order Online Now ! Email : info@bichengpcb.com

20 mil RO4003C PCB
20 mil RO4003C PCB
Search
Home Search

  • Rogers RO3000 Series Dielectric Constant High Frequency Circuit Materials
    • June 21. 2022

    Rogers RO3000 Series Dielectric Constant High Frequency Circuit Materials RO3000 series circuit board material models: RO3003, RO3006, RO3010 and RO3035 high frequency laminate RO3000 high frequency circuit material is a ceramic filled PTFE composite for commercial microwave and RF circuits. RO3000 family of products is a circuit board material with electrical characteristics and mechanical stabil...

  • PTFE Microstrip Microwave Circuit Board
    • June 29. 2022

    PTFE Microstrip Microwave Circuit Board ROGERS' RT/duroid high frequency circuit board material is a polytetrafluoroethylene (PTFE) sheet filled with ceramic or random glass fiber laminates with low dielectric loss, low water absorption, and dielectric constant that varies with frequency Stability and other advantages, can be widely used in high reliability, aerospace and defense applications. Rec...

  • What's the Difference between High-Frequency Microwave PCBs and Aluminum-based PCBs?
    • July 13. 2022

    What's the Difference between High-Frequency Microwave PCBs and Aluminum-based PCBs? 1. Let’s talk about high-frequency microwave printed circuit boards first High-frequency microwave printed circuit boardsare heating up in China. In recent years, many printed circuit board companies in East China, North China, and the Pearl River Delta have been staring at the market of high-frequency microwave b...

  • Some Resons For Using RT/duroid 5870 Printed Circuit Board
    • August 17. 2022

    RT/duroid 5870 Printed Circuit Board Hello everyone, Today, we’re going to talk about high frequency PCB built on RT/duroid 5870 laminates. RT/duroid 5870 is glass microfiber reinforced PTFE composite of Rogers Corporation, which is designed for exacting stripline and microstrip circuit applications. There’re some reasons for using RT/duroid 5870 material. The first one is lowest electrical loss a...

  • The Introduction for High Frequency PCB Built on RO4003C Laminates
    • August 25. 2022

    RO4003C High Frequency PCB We’re going to introduce high frequency PCB built on RO4003C laminates. RO4003C high frequency materials are woven glass reinforced hydrocarbon ceramic-filled laminates produced by Rogers Corporation. It has the similar electrical properties of PTFE/woven glass and manufacturability of epoxy resin materials. RO4003C materials are designed to offer superior high frequency...

  • A Type of High Frequency PCB Built on Thermoset Microwave Material---TMM 4
    • September 07. 2022

    TMM4 High Frequency PCB There is a type of high frequency PCB built on thermoset TMM 4 microwave material Rogers TMM 4 PCB is a ceramic, hydrocarbon, thermoset polymer composite designed for stripline and microstrip applications. It has strong mechanical and chemical properties combined many of the benefits of both ceramic and traditional PTFE materials. It is based on thermoset resins which allow...

    A total of

    12

    pages

© Copyright: 2024 Shenzhen Bicheng Electronics Technology Co., Ltd.. All Rights Reserved.

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #