Shenzhen Bicheng
Electronics Technology Co., Ltd

# Call Us Now ! Tel : +86 755 27374946

# Order Online Now ! Email : info@bichengpcb.com

20 mil RO4003C PCB
20 mil RO4003C PCB
Search
Home Search

  • The FR4 and the Mixing of Rogers Substrate Parameters and Normal Thickness
    • June 15. 2022

    The FR4 and the Mixing of Rogers Substrate Parameters and Normal Thickness 1. FR-4 substrate parameter classification: dielectric constant parameter, dielectric loss parameter, IG value parameter FR-4 susbstrate is made of epoxy resin + glass cloth pressed into a double-sided FR4 PCB board, - commonly used FR4 copper-coated plate, relative to the air dielectric constant is 4.2-4.7. This permittivi...

  • Rogers RO3000 Series Dielectric Constant High Frequency Circuit Materials
    • June 21. 2022

    Rogers RO3000 Series Dielectric Constant High Frequency Circuit Materials RO3000 series circuit board material models: RO3003, RO3006, RO3010 and RO3035 high frequency laminate RO3000 high frequency circuit material is a ceramic filled PTFE composite for commercial microwave and RF circuits. RO3000 family of products is a circuit board material with electrical characteristics and mechanical stabil...

  • What's the Difference between High-Frequency Microwave PCBs and Aluminum-based PCBs?
    • July 13. 2022

    What's the Difference between High-Frequency Microwave PCBs and Aluminum-based PCBs? 1. Let’s talk about high-frequency microwave printed circuit boards first High-frequency microwave printed circuit boardsare heating up in China. In recent years, many printed circuit board companies in East China, North China, and the Pearl River Delta have been staring at the market of high-frequency microwave b...

  • How About The Rogers RO3035 Printed Circuit Board You Need?
    • August 10. 2022

    Hello everyone, Today, we are going to talk about high frequency PCB built on Rogers RO3035 substrates. Rogers RO3035 PCBs are ceramic-filled PTFE based high frequency circuit boards. Its expansion coefficient is matched to that of copper, which allows the PCBs to exhibit excellent dimensional stability. RO3035 materials have dielectric constant of 3.50 at 10GHz. With the characteristics of stable...

  • Some Resons For Using RT/duroid 5870 Printed Circuit Board
    • August 17. 2022

    RT/duroid 5870 Printed Circuit Board Hello everyone, Today, we’re going to talk about high frequency PCB built on RT/duroid 5870 laminates. RT/duroid 5870 is glass microfiber reinforced PTFE composite of Rogers Corporation, which is designed for exacting stripline and microstrip circuit applications. There’re some reasons for using RT/duroid 5870 material. The first one is lowest electrical loss a...

  • The Introduction for High Frequency PCB Built on RO4003C Laminates
    • August 25. 2022

    RO4003C High Frequency PCB We’re going to introduce high frequency PCB built on RO4003C laminates. RO4003C high frequency materials are woven glass reinforced hydrocarbon ceramic-filled laminates produced by Rogers Corporation. It has the similar electrical properties of PTFE/woven glass and manufacturability of epoxy resin materials. RO4003C materials are designed to offer superior high frequency...

    A total of

    23

    pages

© Copyright: 2024 Shenzhen Bicheng Electronics Technology Co., Ltd.. All Rights Reserved.

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #