• June 29. 2022

PTFE Microstrip Microwave Circuit Board ROGERS' RT/duroid high frequency circuit board material is a polytetrafluoroethylene (PTFE) sheet filled with ceramic or random glass fiber laminates with low dielectric loss, low water absorption, and dielectric constant that varies with frequency Stability and other advantages, can be widely used in high reliability, aerospace and defense applications. Rec...

• August 03. 2022

Hello everyone, Today, I am going to talk about another type of heat management RF PCBs: TC350 PCB. Rogers TC350 PCBs are comprised of PTFE, highly thermally conductive ceramic fillers and woven glass reinforcement. It offers us a unique combination of low insertion loss and higher thermal conductivity. This enables superior reliability and reduced operating temperatures in high power applications...

• August 10. 2022

Hello everyone, Today, we are going to talk about high frequency PCB built on Rogers RO3035 substrates. Rogers RO3035 PCBs are ceramic-filled PTFE based high frequency circuit boards. Its expansion coefficient is matched to that of copper, which allows the PCBs to exhibit excellent dimensional stability. RO3035 materials have dielectric constant of 3.50 at 10GHz. With the characteristics of stable...

• November 10. 2022

What circuit boards do we do in RF Field? Founded in 2003, Bicheng PCB has been an established high frequency PCB supplier and exporter in Shenzhen China, servicing cellular base station antenna, high frequency passive components, microstrip line and band line circuit, millimeter wave equipment, radar systems, digital radio frequency antenna etc for more than 19 years. Our high frequency PCBs are ...

• November 24. 2022

RF and Microwave PCB In comparison to ordinary boards, radio frequency (RF) boards are built to function at frequencies higher than 100 MHz. The PCB industry has been forced to improve its ability to add more circuits to the boards and handle greater frequency ranges by the expanding IOT market. In the PCB sector, we constantly adapt to new trends and technology. We have improved our capabilities ...

• December 06. 2022

RF-10 laminates are designed to offer a cost-effective substrate with acceptable delivery times for the industry. RF-10 fills a requirement for size reduction in RF applications. This kind of 60mil RF-10 substrate is used to construct low loss, high DK PCBs. With a sizable region of immersion gold and a partial green solder mask, it is a double layer build-up. With a high dielectric constant (10.2...