• December 07. 2022

RF-35 High volume commercial microwave and RF laminate Taconic RF-35 is an organic-ceramic laminate in the ORCER family of Taconic products. lt is based on woven glass reinforcement. RF-35 PCB is a result of Taconic's expertise in both ceramic fill technology and in coated PTFE fiberglass. RF-35 material is the best choice for low cost, high volume commercial microwave and radio frequency applicat...

• December 14. 2022

Taconic CER-10 RF PCB Printed Circuit Board CER-10 is an organic-ceramic DK-10 laminate in the ORCER family of Taconic products. It is based on a woven glass reinforcement. CER-10 PCB exhibits exceptional interlaminar bond strength and solder resistance. Its proprietary composition results in low moisture absorption and uniform electrical properties. Taconic CER 10 PCB has a board between each lam...

• February 14. 2023

Rogers RO3035 high frequency circuit materials are PTFE composites filled with ceramic and designed for use in RF and commercial microwave applications. It was created to provide mechanical and electrical stability at affordable prices. They boast circuit materials with consistent mechanical properties regardless of dielectric constant selection. This enables the designer to create multilayer boar...

• February 23. 2023

We’re going to talk about a type ofhigh volume fiberglass reinforcedmicrowave PCB ----TLX-8 PCB, which offers reliability in a wide range of RF applications. Taconic TLX-8 PCB Circuit are ideal for use in radar systems, mobile communications, microwave test equipment and microwave transmission devices. To begin with, let’s move on the data sheet of TLX-8 laminate. The dielectric constant (DK) test...

• March 02. 2023

TLX PCB provides dependability for a variety of RF applications. Because to its 2.45 to 2.65 DK range, available thicknesses, and copper cladding, this material is adaptable. It is appropriate for microwave designs with few layers. TLX series PCB is a fiberglass laminate with a PTFE base that is perfect for usage in RF components, microwave test equipment, mobile communications, and radar systems....

• March 08. 2023

Rogers PCB is a high-frequency board made from raw materials produced by Rogers. It differs from standard PCB boards in that it contains epoxy resin (FR4). It does not have a glass fiber in the middle and the high-frequency material is a ceramic base. Rogers has a higher dielectric constant and is more stable at high temperatures. Its dielectric constant thermal expansion coefficient is very simil...