Shenzhen Bicheng
Electronics Technology Co., Ltd

# Call Us Now ! Tel : +86 755 27374946

# Order Online Now ! Email : info@bichengpcb.com

20 mil RO4003C PCB
20 mil RO4003C PCB
Search
Home Search

  • A Type of High Frequency PCB Built on Thermoset Microwave Material---TMM 4
    • September 07. 2022

    TMM4 High Frequency PCB There is a type of high frequency PCB built on thermoset TMM 4 microwave material Rogers TMM 4 PCB is a ceramic, hydrocarbon, thermoset polymer composite designed for stripline and microstrip applications. It has strong mechanical and chemical properties combined many of the benefits of both ceramic and traditional PTFE materials. It is based on thermoset resins which allow...

  • Why Choose RT/duroid 6010.2LM High Frequency PCB
    • September 14. 2022

    Why Choose RT/duroid 6010.2LM High Frequency PCB Rogers RT/duroid 6010.2LM high frequency PCBs are a type of high DK PCB boards of ceramic-filled PTFE composites which are designed for electronic and microwave circuit applications. PCB material is mainly used in electronic and microwave circuits. Its performance has an important impact on the signal transmission speed, energy loss and characterist...

  • What's Advantages of Rogers 6002 PCB?
    • September 21. 2022

    What's Advantages of Rogers 6002 PCB? Rogers' RT/duroid 6002 high frequency material is the preferred PTFE-based ceramic composites. It is a kind of low loss and low dielectric constant laminate, which can meet the strict requirements for mechanical reliability and electrical stability in complex microwave structural design. The dielectric constant of RT/duroid 6002 has excellent resistance to tem...

  • What is FR4 in PCB?
    • October 19. 2022

    What is FR4 in PCB? FR-4 is a code of a grade of flame-resistant materials, which means a material specification that a resin material must be able to extinguish by itself after burning. It is not a material name, but a material grade. Therefore, general PCB circuit boards, There are many types of FR-4 grade materials used, but most of them are composite materials made of Tera-Function epoxy resin...

  • What is the difference between Rogers PCB and ordinary PCB?
    • October 27. 2022

    What is the difference between Rogers PCB and ordinary PCB? Compared with ordinary PCB, Rogers is more suitable for making high-frequency PCB, and the board has better stability and higher precision. Rogers board has the following 4 series: RO4000 high frequency PCB: Hydrocarbon-filled ceramic laminate with excellent cost performance. High-reliability TMM PCB: rich dielectric constant, DK from 3.2...

  • Why Choose the Rogers RO4360G2 High Frequency PCB for you?
    • November 02. 2022

    We’re going to talk about Rogers’ first high dielectric constant PCB --- RO4360G2 high frequency PCB. RO4360G2 PCB is glass-reinforced, hydrocarbon ceramic-filled thermoset printed circuit board that provides the ideal balance of performance, and manufacturability is similar to FR-4 PCB. They are lead-free process capable and have better rigidity in multi-layer board constructions, while reducing ...

© Copyright: 2024 Shenzhen Bicheng Electronics Technology Co., Ltd.. All Rights Reserved.

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #