Shenzhen Bicheng
Electronics Technology Co., Ltd

# Call Us Now ! Tel : +86 755 27374946

# Order Online Now ! Email : info@bichengpcb.com

20 mil RO4003C PCB
20 mil RO4003C PCB
Search
Home Search

  • High Frequency PCB on TC350
    • August 03. 2022

    Hello everyone, Today, I am going to talk about another type of heat management RF PCBs: TC350 PCB. Rogers TC350 PCBs are comprised of PTFE, highly thermally conductive ceramic fillers and woven glass reinforcement. It offers us a unique combination of low insertion loss and higher thermal conductivity. This enables superior reliability and reduced operating temperatures in high power applications...

  • How About The Rogers RO3035 Printed Circuit Board You Need?
    • August 10. 2022

    Hello everyone, Today, we are going to talk about high frequency PCB built on Rogers RO3035 substrates. Rogers RO3035 PCBs are ceramic-filled PTFE based high frequency circuit boards. Its expansion coefficient is matched to that of copper, which allows the PCBs to exhibit excellent dimensional stability. RO3035 materials have dielectric constant of 3.50 at 10GHz. With the characteristics of stable...

  • Some Resons For Using RT/duroid 5870 Printed Circuit Board
    • August 17. 2022

    RT/duroid 5870 Printed Circuit Board Hello everyone, Today, we’re going to talk about high frequency PCB built on RT/duroid 5870 laminates. RT/duroid 5870 is glass microfiber reinforced PTFE composite of Rogers Corporation, which is designed for exacting stripline and microstrip circuit applications. There’re some reasons for using RT/duroid 5870 material. The first one is lowest electrical loss a...

  • The Introduction for High Frequency PCB Built on RO4003C Laminates
    • August 25. 2022

    RO4003C High Frequency PCB We’re going to introduce high frequency PCB built on RO4003C laminates. RO4003C high frequency materials are woven glass reinforced hydrocarbon ceramic-filled laminates produced by Rogers Corporation. It has the similar electrical properties of PTFE/woven glass and manufacturability of epoxy resin materials. RO4003C materials are designed to offer superior high frequency...

  • What Would You Choose To Do With The RO3003 High Frequency PCB
    • September 02. 2022

    What Would You Choose To Do With The RO3003 High Frequency PCB We are going to to talk about RO3003 high frequency PCBs. Rogers RO3003 high frequency materials are ceramic-filled PTFE composites intended for using in commercial microwave and RF applications.&n...

  • A Type of High Frequency PCB Built on Thermoset Microwave Material---TMM 4
    • September 07. 2022

    TMM4 High Frequency PCB There is a type of high frequency PCB built on thermoset TMM 4 microwave material Rogers TMM 4 PCB is a ceramic, hydrocarbon, thermoset polymer composite designed for stripline and microstrip applications. It has strong mechanical and chemical properties combined many of the benefits of both ceramic and traditional PTFE materials. It is based on thermoset resins which allow...

    A total of

    24

    pages

© Copyright: 2024 Shenzhen Bicheng Electronics Technology Co., Ltd.. All Rights Reserved.

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #