Shenzhen Bicheng
Electronics Technology Co., Ltd

# Call Us Now ! Tel : +86 755 27374946

# Order Online Now ! Email :

20 mil RO4003C PCB
20 mil RO4003C PCB
Home Blog


  • Acquire Knowledge of Rogers 5880 Laminated PCB Materials
    • January 10. 2023

    Acquire Knowledge of Rogers 5880 Laminated PCB Materials Rogers 5880 laminated materials are produced using the same superior, dependable materials and techniques as Rogers, earning Rogers significant recognition from high-frequency material producers. The PCB's dielectric qualities play a key role in some designs. Power management is essential for all applications, whether high-speed, RF, microwa...

  • Rogers 4003 PCB High Frequency Printed Circuit board
    • January 06. 2023

    Rogers 4003 PCB High Frequency Printed Circuit board The basic components of Rogers 4003 are hydrocarbons and filled ceramics. The dielectric constant for Rogers 4003 is 3.55. High-frequency PCBs made of Rogers 4003 have good consistency and stability. As a member of the 4000 series, Rogers 4003 material can be pressed using Rogers 4003 in place of FR4. The Rogers 4003 prepreg suggests using RO445...

  • Why Choose Rogers Printed Circuit Boards?
    • January 04. 2023

    As 5G Technology develops, more and more devices request high-performance high-frequency PCBs and RF PCBs that need low signal losses and low electrical noise. Rogers PCB materials are cost-effective and perfectly meets the required technological requirements. Rogers PCB is a type of high-frequency board that raw material is produced by Rogers company. It is different from the conventional PCB boa...

  • RT/duroid 6006 High Frequency PCB
    • December 28. 2022

    RT/duroid 6006 High Frequency PCB RT/duroid 6006 high frequency PCBs are ceramic PTFE composites which are designed for electronic and microwave circuit applications requiring a high dielectric constant. RT/duroid 6006 PCB can provide us with hi...

  • What's the Features & Bebefits for TC600 PCB?
    • December 20. 2022

    What's the Features  & Bebefits for TC600 PCB? For use as a printed circuit board substrate, the "Best-In-Class" thermal conductivity of the TC600 woven fiberglass reinforced, ceramic filled, PTFE-based composite is intended to improve heat transmission while lowering insertion and dielectric loss. Greater amplifier and antenna gains/efficiencies are produced via lower losses. For the 6.1...

  • Taconic CER-10 RF PCB Printed Circuit Board
    • December 14. 2022

    Taconic CER-10 RF PCB Printed Circuit Board CER-10 is an organic-ceramic DK-10 laminate in the ORCER family of Taconic products. It is based on a woven glass reinforcement. CER-10 PCB exhibits exceptional interlaminar bond strength and solder resistance. Its proprietary composition results in low moisture absorption and uniform electrical properties. Taconic CER 10 PCB has a board between each lam...

  • Teflon PTFE PCB
    • December 13. 2022

    Teflon PTFE PCB High-frequency PCBs using polytetrafluoroethylene (PTFE) as their PCB substrate are known as Teflon PCBs or PTFE PCBs. Teflon PCBs transmit signals at frequencies up to 5 GHz. Dupont Corporation markets its PTFE materials under the Teflon brand name, which is so well-known that people often refer to PTFE substrate PCBs used in microwave and RF applications as Teflon PCBs. Propertie...

  • RF-35 High volume commercial microwave and RF laminate
    • December 07. 2022

    RF-35 High volume commercial microwave and RF laminate Taconic RF-35 is an organic-ceramic laminate in the ORCER family of Taconic products. lt is based on woven glass reinforcement. RF-35 PCB is a result of Taconic's expertise in both ceramic fill technology and in coated PTFE fiberglass. RF-35 material is the best choice for low cost, high volume commercial microwave and radio frequency applicat...

  • Taconic RF-10 PCB
    • December 06. 2022

    RF-10 laminates are designed to offer a cost-effective substrate with acceptable delivery times for the industry. RF-10 fills a requirement for size reduction in RF applications. This kind of 60mil RF-10 substrate is used to construct low loss, high DK PCBs. With a sizable region of immersion gold and a partial green solder mask, it is a double layer build-up. With a high dielectric constant (10.2...

© Copyright: 2024 Shenzhen Bicheng Electronics Technology Co., Ltd.. All Rights Reserved.

IPv6 network supported

IPv6 network supported


Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #