-
Dk 3.0 or Dk 10.2: Which High-Frequency Substrate Fits Your Antenna Design?
Dk 3.0 or Dk 10.2: Which High-Frequency Substrate Fits Your Antenna Design? Quick Answer Choose Dk 3.0 for wider traces, easier impedance control, and higher-frequency operation where dispersion matters. Choose Dk 10.2 for circuit miniaturization, compact antenna spacing, or high-Dk architectures. TFA1020, a PTFE-ceramic composite with no glass fiber, delivers Dk 10.2 at 10 GHz with Df as low as 0...
-
Why Choose a 4-Layer 5mil RT6202+FR-4 Hybrid PCB for High-Frequency RF Designs?
Why Choose a 4-Layer 5mil RT6202+FR-4 Hybrid PCB for High-Frequency RF Designs? Introduction When designing RF and microwave circuits above 3 GHz, engineers face a persistent dilemma: standard FR-4 substrates introduce unacceptable signal loss and dielectric instability, while fully Rogers-based multilayer boards carry prohibitive material costs for digital and power sections. A 4-layer 5mil RT620...
-
Why Does an 8mil ENEPIG High-Frequency PCB Matter for RF Design?
Why Does an 8mil ENEPIG High-Frequency PCB Matter for RF Design? Meta Description: An engineering deep-dive into WL-CT615 hydrocarbon-ceramic PCB with 8mil dielectric core and ENEPIG finish — material data, design trade-offs, and application guidance for RF and hardware engineers. RF engineers face a persistent tension: shrinking form factors versus signal integrity. When a board must fit into an ...
-
Is a 4-Layer 8mil RO4003C Tg170 FR-4 Hybrid PCB Right for You?
Is a 4-Layer 8mil RO4003C Tg170 FR-4 Hybrid PCB Right for You? Meta description: A 4-layer 8mil RO4003C + Tg170 FR-4 hybrid PCB places low-loss RF material where it matters. How the stack works, what it costs, and when it is worth specifying. Every mixed-signal design eventually reaches the same decision. One section of the board carries RF or microwave traces — antenna feeds,...
-
How Do You Build an 8-Layer RO4350B MT40 Hybrid PCB Without Defects?
How Do You Build an 8-Layer RO4350B MT40 Hybrid PCB Without Defects? A hybrid stack looks elegant on a cross-section drawing. It promises the low-loss, tightly controlled RF behavior of a ceramic-loaded hydrocarbon laminate on the outer layers, and the cost and processing familiarity of an FR-4-type low-loss material in the middle. On paper, that is exactly what an 8-Layer RO4350B MT4...
-
How to Select 1080 Prepreg for Rogers RO3010 and FR-4 Hybrid Lamination?
How to Select 1080 Prepreg for Rogers RO3010 and FR-4 Hybrid Lamination? Introduction Hybrid multilayer PCBs that pair ceramic-filled PTFE high-frequency laminates such as Rogers RO3010 with conventional FR-4 prepreg have become a standard construction for cost-sensitive RF designs. Place the premium high-Dk material only where RF signals travel, and use economical FR-4 bon...
Call Us Now !
Tel : +86 755 27374946
Order Online Now !
Email : info@bichengpcb.com
