• October 12. 2022

Aluminum is one alternative material that can be used in the core of a PCB, commonly referred to using the misnomer “aluminum PCN”. Using aluminum as the metal core in a PCB allows it to easily dissipate heat away from active components thanks to its high thermal conductivity. The high thermal conductivity of aluminum or another metal in the core of a PCB allow heat to be distributed more uniforml...

• October 27. 2022

What is the difference between Rogers PCB and ordinary PCB? Compared with ordinary PCB, Rogers is more suitable for making high-frequency PCB, and the board has better stability and higher precision. Rogers board has the following 4 series: RO4000 high frequency PCB: Hydrocarbon-filled ceramic laminate with excellent cost performance. High-reliability TMM PCB: rich dielectric constant, DK from 3.2...

• November 02. 2022

We’re going to talk about Rogers’ first high dielectric constant PCB --- RO4360G2 high frequency PCB. RO4360G2 PCB is glass-reinforced, hydrocarbon ceramic-filled thermoset printed circuit board that provides the ideal balance of performance, and manufacturability is similar to FR-4 PCB. They are lead-free process capable and have better rigidity in multi-layer board constructions, while reducing ...

• November 23. 2022

RO3006 High Frequency PCB Rogers RO3006 printed circuit boards are ceramic-filled PTFE composites designed to offer exceptional electrical and mechanical stability at competitive price, intended for use in commercial microwave and RF applications The Rogers RO3006 laminates are polytetrafluoroethylene composites filled with ceramic and created especially for industrial microwave and radio frequenc...

• November 24. 2022

RF and Microwave PCB In comparison to ordinary boards, radio frequency (RF) boards are built to function at frequencies higher than 100 MHz. The PCB industry has been forced to improve its ability to add more circuits to the boards and handle greater frequency ranges by the expanding IOT market. In the PCB sector, we constantly adapt to new trends and technology. We have improved our capabilities ...

• December 06. 2022

RF-10 laminates are designed to offer a cost-effective substrate with acceptable delivery times for the industry. RF-10 fills a requirement for size reduction in RF applications. This kind of 60mil RF-10 substrate is used to construct low loss, high DK PCBs. With a sizable region of immersion gold and a partial green solder mask, it is a double layer build-up. With a high dielectric constant (10.2...