Shenzhen Bicheng
Electronics Technology Co., Ltd

# Call Us Now ! Tel : +86 755 27374946

# Order Online Now ! Email : info@bichengpcb.com

20 mil RO4003C PCB
20 mil RO4003C PCB
Search
Home Search

  • Do you know more about Rogers TMM Series PCB?
    • September 28. 2022

    Do you know more about Rogers TMM Series PCB? Rogers TMM thermoset microwave materials are hydrocarbon ceramics and thermoset polymers composites specifically designed for strip-line and microstrip applications. TMM comes in various claddings and dielectric constants. TMM laminates feature some mechanical and electrical properties that make them ideal for several applications. TMM has an excellent...

  • What is FR4 in PCB?
    • October 19. 2022

    What is FR4 in PCB? FR-4 is a code of a grade of flame-resistant materials, which means a material specification that a resin material must be able to extinguish by itself after burning. It is not a material name, but a material grade. Therefore, general PCB circuit boards, There are many types of FR-4 grade materials used, but most of them are composite materials made of Tera-Function epoxy resin...

  • The more detailed information aboout RT/duroid 5880LZ High Frequency PCB
    • November 16. 2022

    There is a type of lightweight high frequency circuit board: RT/duroid 5880LZ PCB. Rogers RT/duroid 5880LZ laminates are filled PTFE composites designed for exacting strip-line and micro-strip circuit applications. They contain a unique filler that results in a low density, lightweight material for high performance and weight sensitive applications. Let’s see the data sheet of RT/duroid 5880LZ mat...

  • What Are Rogers Materials?
    • December 01. 2022

    What Are Rogers Materials? We shall start this section of the article with defining the Rogers PCB materials. The primary materials used in Rogers PCBs are high frequency and hydrocarbon ceramics. It supports improved production development and has a significant impact. Additionally, it lowers the cost of the printed construction, which allows for continuous heating. As a result, it lessens the el...

  • Taconic RF-10 PCB
    • December 06. 2022

    RF-10 laminates are designed to offer a cost-effective substrate with acceptable delivery times for the industry. RF-10 fills a requirement for size reduction in RF applications. This kind of 60mil RF-10 substrate is used to construct low loss, high DK PCBs. With a sizable region of immersion gold and a partial green solder mask, it is a double layer build-up. With a high dielectric constant (10.2...

  • RF-35 High volume commercial microwave and RF laminate
    • December 07. 2022

    RF-35 High volume commercial microwave and RF laminate Taconic RF-35 is an organic-ceramic laminate in the ORCER family of Taconic products. lt is based on woven glass reinforcement. RF-35 PCB is a result of Taconic's expertise in both ceramic fill technology and in coated PTFE fiberglass. RF-35 material is the best choice for low cost, high volume commercial microwave and radio frequency applicat...

    A total of

    4

    pages

© Copyright: 2023 Shenzhen Bicheng Electronics Technology Co., Ltd.. All Rights Reserved.

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #