• January 11. 2022

With the rapid development of electronic communication technology, in order to achieve high-speed and high-frequency signal transmission, more and more high-frequency printed circuit boards are used in communication equipment. The dielectric materials used in high-frequency boards have excellent electrical properties and good Chemical stability, then which of the following is its main manifestatio...

• February 10. 2022

Rogers RO3006 laminate is a ceramic filled PTFE composite designed for commercial microwave and radio frequency applications. These high-frequency circuit materials have excellent mechanical and electrical properties, making them stable and reliable. RO3006 material provides a stable dielectric constant, which helps to eliminate dielectric constant variation. These materials have stable mechanical...

• February 16. 2022

Choosing the Right RF PCB Material When designing RF PCBS applications, the choice of PCB substrate materials is a key performance factor. For complex microwave structures that are mechanically reliable and electrically stable, an optimal combination of electrical and mechanical properties is required. The extremely low dielectric constant thermal coefficient provides the electrical stability soug...

• February 23. 2022

Know More about Rogers RO3210 PCB Laminates RO3203™, RO3206™ and RO3210™ high frequency circuit materials are laminated with ceramic fillers reinforced with woven glass cloth. These materials have been developed to provide exceptional electrical and mechanical stability at a competitive price. RO3200™ series materials as an extension of the RO3000® series of high frequency materials have a ver...

• March 31. 2022

1. An uWB monopole antenna based on four-layer printed circuit board (PCB) is designed based on the method of resonance of multiple radiating patches in different frequency bands. The antenna is fed by microstrip and has two patches of different sizes on two different planes of the dielectric substrate. In order to realize the miniaturization of the antenna, a multilayer uwb monopole antenna with ...

• April 07. 2022

Rogers TMM6 Microwave high frequency board material has isotropic dielectric constant (Dk). Like other TMM series materials, Rogers TMM 6 combines many of the desirable properties of ceramic and PTFE substrates and utilizes simple flexible plate machining techniques. Rogers TMM 6 Thermosetting MICROWAVE HF board materials are designed for ribbon-line and microstrip line applications with high reli...