Call Us Now ! Tel : +86 755 27374946
Order Online Now ! Email : info@bichengpcb.com
How to Distinguish the Step (Stack-up) of HDI PCB? Tag#Stacked via Staggered via HDI | PCB 1+N+1 HDI PCB | 2+N+2 HDI PCB HDI stands for high density interconnection. It contains non-mechanical drilling, the ring of microvias and blind via below 6 mil, internal and external layers of track width, track gap below 4 mil, pad diameter is not more than 0.35 mm. We call this kind of multi-layer PCB...
RO4000 series high frequency circuit board materials have high frequency performance and low production cost of circuit boards. It has low loss and similar processing technology to ordinary epoxy resin/glass woven cloth (FR4), so it has a strong price competitiveness. When the circuit operating frequency is above 50OMHz, the range of materials that design engineers can choose is greatly reduced. R...
RT/duroidR 5870 and .5880 are glass microfiber reinforced PTFF composite materials. They are designed for precise stripline and microstrip circuit applications. Randomly oriented microglass fibers make the dielectric constant have a good consistency. The dielectric constant between the different plates of RT/duroid 5870 and 5880 laminates remains the same and is a constant in a wide frequency rang...
RT/duroid 6035HTc high-frequency circuit material is a ceramic-filled PTFE composite material used in high-power radio frequency and microwave equipment. The thermal conductivity of RT/duroid 6035HTC laminate is 2.4 times that of standard RT/duroid 60o0 products, and the copper foil (electrolytic copper and reverse copper) used has long-term thermal stability, which is ideal for high-power device ...
Summary of the classification of pcb circuit boards, detailed introduction of the use and characteristics of single-sided circuit boards, double-sided circuit boards, and multi-layer circuit boards. PCB circuit board classification PCB circuit boards are divided into single-sided circuit boards, double-sided circuit boards, and multilayer circuit boards according to the number of superimposed laye...
With the rapid development of electronic communication technology, in order to achieve high-speed and high-frequency signal transmission, more and more high-frequency printed circuit boards are used in communication equipment. The dielectric materials used in high-frequency boards have excellent electrical properties and good Chemical stability, then which of the following is its main manifestatio...
© Copyright: 2024 Shenzhen Bicheng Electronics Technology Co., Ltd.. All Rights Reserved.
IPv6 network supported