Shenzhen Bicheng
Electronics Technology Co., Ltd

# Call Us Now ! Tel : +86 755 27374946

# Order Online Now ! Email : info@bichengpcb.com

20 mil RO4003C PCB
20 mil RO4003C PCB
Search
Home Search

  • RT/duroid® 5870 /5880 High Frequency Laminate
    • 2021-12-02
    RT/duroid® 5870 /5880 High Frequency Laminate

    RT/duroidR 5870 and .5880 are glass microfiber reinforced PTFF composite materials. They are designed for precise stripline and microstrip circuit applications. Randomly oriented microglass fibers make the dielectric constant have a good consistency. The dielectric constant between the different plates of RT/duroid 5870 and 5880 laminates remains the same and is a constant in a wide frequency rang...

  • RT/duroid 6035HTC High Frequency PCB
    • 2021-12-10

    RT/duroid 6035HTc high-frequency circuit material is a ceramic-filled PTFE composite material used in high-power radio frequency and microwave equipment. The thermal conductivity of RT/duroid 6035HTC laminate is 2.4 times that of standard RT/duroid 60o0 products, and the copper foil (electrolytic copper and reverse copper) used has long-term thermal stability, which is ideal for high-power device ...

  • PTFE Microstrip Microwave Circuit Board
    • June 29. 2022

    PTFE Microstrip Microwave Circuit Board ROGERS' RT/duroid high frequency circuit board material is a polytetrafluoroethylene (PTFE) sheet filled with ceramic or random glass fiber laminates with low dielectric loss, low water absorption, and dielectric constant that varies with frequency Stability and other advantages, can be widely used in high reliability, aerospace and defense applications. Rec...

  • Some Resons For Using RT/duroid 5870 Printed Circuit Board
    • August 17. 2022

    RT/duroid 5870 Printed Circuit Board Hello everyone, Today, we’re going to talk about high frequency PCB built on RT/duroid 5870 laminates. RT/duroid 5870 is glass microfiber reinforced PTFE composite of Rogers Corporation, which is designed for exacting stripline and microstrip circuit applications. There’re some reasons for using RT/duroid 5870 material. The first one is lowest electrical loss a...

  • Why Choose RT/duroid 6010.2LM High Frequency PCB
    • September 14. 2022

    Why Choose RT/duroid 6010.2LM High Frequency PCB Rogers RT/duroid 6010.2LM high frequency PCBs are a type of high DK PCB boards of ceramic-filled PTFE composites which are designed for electronic and microwave circuit applications. PCB material is mainly used in electronic and microwave circuits. Its performance has an important impact on the signal transmission speed, energy loss and characterist...

  • What's Advantages of Rogers 6002 PCB?
    • September 21. 2022

    What's Advantages of Rogers 6002 PCB? Rogers' RT/duroid 6002 high frequency material is the preferred PTFE-based ceramic composites. It is a kind of low loss and low dielectric constant laminate, which can meet the strict requirements for mechanical reliability and electrical stability in complex microwave structural design. The dielectric constant of RT/duroid 6002 has excellent resistance to tem...

    A total of

    5

    pages

© Copyright: 2024 Shenzhen Bicheng Electronics Technology Co., Ltd.. All Rights Reserved.

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #