• March 31. 2022

1. An uWB monopole antenna based on four-layer printed circuit board (PCB) is designed based on the method of resonance of multiple radiating patches in different frequency bands. The antenna is fed by microstrip and has two patches of different sizes on two different planes of the dielectric substrate. In order to realize the miniaturization of the antenna, a multilayer uwb monopole antenna with ...

• March 23. 2022

The rapid development of science and technology determines that all enterprises need to improve, and PCB depends on science and technology, so it is natural not to lag behind. Therefore, the layout of high-frequency PCB has become the key point that we need to discuss when designing PCB high-frequency board. Today, we sorted out the key points you need to pay attention to in the layout of high-fre...

• March 09. 2022

How to choose PCB substrate? In recent years, the printed circuit board market has shifted from traditional hardware products such as desktop computers to wireless communications such as servers and mobile terminals. The mobile communication equipment represented by smart phone promotes PCB to develop towards high-density, lightweight and multi-function. Printed circuit technology cannot be implem...

• March 02. 2022

Who invented PCB? The creator of PCB was the Austrian Paul Eisler, who first used printed circuit boards in radios in 1936. In 1943, Americans mostly used this technology in military radios, and in 1948, the United States officially recognized this invention for commercial use. Printed circuit boards have only been widely used since the mid-1950s. PCBs are ubiquitous and are widely used in communi...

• February 23. 2022

Know More about Rogers RO3210 PCB Laminates RO3203™, RO3206™ and RO3210™ high frequency circuit materials are laminated with ceramic fillers reinforced with woven glass cloth. These materials have been developed to provide exceptional electrical and mechanical stability at a competitive price. RO3200™ series materials as an extension of the RO3000® series of high frequency materials have a ver...

• February 16. 2022

Choosing the Right RF PCB Material When designing RF PCBS applications, the choice of PCB substrate materials is a key performance factor. For complex microwave structures that are mechanically reliable and electrically stable, an optimal combination of electrical and mechanical properties is required. The extremely low dielectric constant thermal coefficient provides the electrical stability soug...

• February 10. 2022

Rogers RO3006 laminate is a ceramic filled PTFE composite designed for commercial microwave and radio frequency applications. These high-frequency circuit materials have excellent mechanical and electrical properties, making them stable and reliable. RO3006 material provides a stable dielectric constant, which helps to eliminate dielectric constant variation. These materials have stable mechanical...

• January 19. 2022

Why do PCBs need impedance Control? 01 What is Impedance In circuits with resistance, inductance, and capacitance, the resistance to alternating current is called impedance. Impedance is usually represented by Z, which is a complex number. The real part is called resistance, and the imaginary part is called reactance. The blocking effect of capacitance on alternating current in the circuit is call...

• January 11. 2022

With the rapid development of electronic communication technology, in order to achieve high-speed and high-frequency signal transmission, more and more high-frequency printed circuit boards are used in communication equipment. The dielectric materials used in high-frequency boards have excellent electrical properties and good Chemical stability, then which of the following is its main manifestatio...