Shenzhen Bicheng
Electronics Technology Co., Ltd

# Call Us Now ! Tel : +86 755 27374946

# Order Online Now ! Email : info@bichengpcb.com

20 mil RO4003C PCB
20 mil RO4003C PCB
Search
Home Search

  • What is High Frequency PCB?
    • 2020.07.18
    What is High Frequency PCB?

    What is High Frequency PCB? Just as its name implies, high frequency is that the frequency is relatively high, generally refers to the frequency of >=300 MHz (i.e. wave length <=1m), that is, the usual radio frequency band. The electromagnetic wave of frequency >=1GHz is called microwave. Typical frequencies for wireless applications: * Current mobile: 0.9GHz - 2GHz * 3G systems: 2.5GHz *...

  • TMM Series Laminate Materials
    • December 30. 2021

    TMM Series Laminate Materials TMM series temperature stable microwave composite circuit board materials are thermosetting resin polymer composite materials filled with ceramic powder, specially designed for high-reliability stripline and microstrip line applications. TMM series laminate materials are suitable for a wide dielectric constant Scope and surface coating requirements. The electrical and...

  • Choosing the Right RF PCB Material
    • February 16. 2022

    Choosing the Right RF PCB Material When designing RF PCBS applications, the choice of PCB substrate materials is a key performance factor. For complex microwave structures that are mechanically reliable and electrically stable, an optimal combination of electrical and mechanical properties is required. The extremely low dielectric constant thermal coefficient provides the electrical stability soug...

  • Know More about Rogers RO3210 PCB Laminates
    • February 23. 2022

    Know More about Rogers RO3210 PCB Laminates RO3203™, RO3206™ and RO3210™ high frequency circuit materials are laminated with ceramic fillers reinforced with woven glass cloth. These materials have been developed to provide exceptional electrical and mechanical stability at a competitive price. RO3200™ series materials as an extension of the RO3000® series of high frequency materials have a ver...

  • Ultra-wideband Antenna with Multilayer Dielectric Substrate
    • March 31. 2022

    1. An uWB monopole antenna based on four-layer printed circuit board (PCB) is designed based on the method of resonance of multiple radiating patches in different frequency bands. The antenna is fed by microstrip and has two patches of different sizes on two different planes of the dielectric substrate. In order to realize the miniaturization of the antenna, a multilayer uwb monopole antenna with ...

  • Polytetrafluoroethylene (PTFE) Radar Board
    • April 22. 2022

    Generally speaking, high frequency can be defined as the pre-rate above 1GHz. The most commonly used high-frequency circuit board substrates are fluorine-based dielectric substrates. For example, polytetrafluoroethylene (PTFE) is usually called Teflon, which is usually used above 5GHz. , In addition, FR-4 or PPO substrate is also used, which can be used for products between 1GHz-10GHz. The physica...

    A total of

    15

    pages

© Copyright: 2024 Shenzhen Bicheng Electronics Technology Co., Ltd.. All Rights Reserved.

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #