Shenzhen Bicheng
Electronics Technology Co., Ltd

# Call Us Now ! Tel : +86 755 27374946

# Order Online Now ! Email : info@bichengpcb.com

20 mil RO4003C PCB
20 mil RO4003C PCB
Search
Home Search

  • What is High Frequency PCB?
    • 2020.07.18
    What is High Frequency PCB?

    What is High Frequency PCB? Just as its name implies, high frequency is that the frequency is relatively high, generally refers to the frequency of >=300 MHz (i.e. wave length <=1m), that is, the usual radio frequency band. The electromagnetic wave of frequency >=1GHz is called microwave. Typical frequencies for wireless applications: * Current mobile: 0.9GHz - 2GHz * 3G systems: 2.5GHz *...

  • How to choose PCB substrate?
    • March 09. 2022

    How to choose PCB substrate? In recent years, the printed circuit board market has shifted from traditional hardware products such as desktop computers to wireless communications such as servers and mobile terminals. The mobile communication equipment represented by smart phone promotes PCB to develop towards high-density, lightweight and multi-function. Printed circuit technology cannot be implem...

  • Ultra-wideband Antenna with Multilayer Dielectric Substrate
    • March 31. 2022

    1. An uWB monopole antenna based on four-layer printed circuit board (PCB) is designed based on the method of resonance of multiple radiating patches in different frequency bands. The antenna is fed by microstrip and has two patches of different sizes on two different planes of the dielectric substrate. In order to realize the miniaturization of the antenna, a multilayer uwb monopole antenna with ...

  • Polytetrafluoroethylene (PTFE) Radar Board
    • April 22. 2022

    Generally speaking, high frequency can be defined as the pre-rate above 1GHz. The most commonly used high-frequency circuit board substrates are fluorine-based dielectric substrates. For example, polytetrafluoroethylene (PTFE) is usually called Teflon, which is usually used above 5GHz. , In addition, FR-4 or PPO substrate is also used, which can be used for products between 1GHz-10GHz. The physica...

  • The FR4 and the Mixing of Rogers Substrate Parameters and Normal Thickness
    • June 15. 2022

    The FR4 and the Mixing of Rogers Substrate Parameters and Normal Thickness 1. FR-4 substrate parameter classification: dielectric constant parameter, dielectric loss parameter, IG value parameter FR-4 susbstrate is made of epoxy resin + glass cloth pressed into a double-sided FR4 PCB board, - commonly used FR4 copper-coated plate, relative to the air dielectric constant is 4.2-4.7. This permittivi...

  • What's the Difference between High-Frequency Microwave PCBs and Aluminum-based PCBs?
    • July 13. 2022

    What's the Difference between High-Frequency Microwave PCBs and Aluminum-based PCBs? 1. Let’s talk about high-frequency microwave printed circuit boards first High-frequency microwave printed circuit boardsare heating up in China. In recent years, many printed circuit board companies in East China, North China, and the Pearl River Delta have been staring at the market of high-frequency microwave b...

    A total of

    7

    pages

© Copyright: 2024 Shenzhen Bicheng Electronics Technology Co., Ltd.. All Rights Reserved.

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #