• July 27. 2026

Is F4BTM298 a Practical Premium Laminate Alternative? Quick Answer Yes—Wangling F4BTM298 is a practical alternative to imported premium RF laminates for many high-frequency designs, particularly those targeting 10 GHz and below where a Dk of 2.98 fits the application. Manufactured by Wangling using a PTFE nano-ceramic composite with fiberglass reinforcement, it delivers Dk 2.98±0.06 and Df 0.0018 ...

• July 27. 2026

What Benefits Does a CuClad 250 PCB Bring to High-Frequency Circuit Design? 1.Introduction High-frequency circuit design demands substrate materials that can maintain signal integrity across microwave and millimeter-wave bands. Among the various PTFE-based laminates available, Rogers CuClad 250 has established itself as a reliable option for engineers balancing electrical performance with mechanic...

• September 03. 2026

Which RF Applications Suit TF960 PCB? A Dk 9.6 Low-Loss Selection Guide Quick Answer TF960 PCB is a high-frequency laminate made from modified PTFE resin, ceramic fillers, and glass fabric. With a dielectric constant (Dk) of 9.6 ± 0.19 and dissipation factor (Df) of 0.0012 at 10 GHz, it targets RF and microwave circuits requiring low insertion loss and stable impedance. It supports 260°C lead-free...

• October 22. 2026

How Do You Build an 8-Layer RO4350B MT40 Hybrid PCB Without Defects? A hybrid stack looks elegant on a cross-section drawing. It promises the low-loss, tightly controlled RF behavior of a ceramic-loaded hydrocarbon laminate on the outer layers, and the cost and processing familiarity of an FR-4-type low-loss material in the middle. On paper, that is exactly what an 8-Layer RO4350B MT40 Hybrid PCB ...

• October 22. 2026

How to Select 1080 Prepreg for Rogers RO3010 and FR-4 Hybrid Lamination? Introduction Hybrid multilayer PCBs that pair ceramic-filled PTFE high-frequency laminates such as Rogers RO3010 with conventional FR-4 prepreg have become a standard construction for cost-sensitive RF designs. Place the premium high-Dk material only where RF signals travel, and use economical FR-4 bonding sheets elsewhere. Y...

• October 22. 2026

Why Use Tg170 TU-768 FR-4 Cores in a 10-Layer RO4350B Hybrid PCB? When a 10-layer RF module is quoted as a pure ceramic build, the bill of materials can look unreasonable for a volume product. The better engineering response is to ask which layers actually need the high-frequency dielectric. In a 10-layer RO4350B + TU-768 hybrid PCB, the two outer-facing cores use10 mil (0.25 mm) RO4350B hydrocarb...