• December 30. 2021

TMM Series Laminate Materials TMM series temperature stable microwave composite circuit board materials are thermosetting resin polymer composite materials filled with ceramic powder, specially designed for high-reliability stripline and microstrip line applications. TMM series laminate materials are suitable for a wide dielectric constant Scope and surface coating requirements. The electrical and...

• February 16. 2022

Choosing the Right RF PCB Material When designing RF PCBS applications, the choice of PCB substrate materials is a key performance factor. For complex microwave structures that are mechanically reliable and electrically stable, an optimal combination of electrical and mechanical properties is required. The extremely low dielectric constant thermal coefficient provides the electrical stability soug...

• February 23. 2022

Know More about Rogers RO3210 PCB Laminates RO3203™, RO3206™ and RO3210™ high frequency circuit materials are laminated with ceramic fillers reinforced with woven glass cloth. These materials have been developed to provide exceptional electrical and mechanical stability at a competitive price. RO3200™ series materials as an extension of the RO3000® series of high frequency materials have a ver...

• June 08. 2022

Rogers HF Board - Microwave RF Circuit Board 24GHz microwave radar sensor is widely used in vehicle active safety, intelligent transportation, safety protection, industrial applications and uav collision avoidance. Receiving antenna, as the key reproductive device of radar sensor, plays a "throat" effect in radar sensor. On the one hand, it needs to transmit rf signals as much as possible. On the ...

• June 21. 2022

Rogers RO3000 Series Dielectric Constant High Frequency Circuit Materials RO3000 series circuit board material models: RO3003, RO3006, RO3010 and RO3035 high frequency laminate RO3000 high frequency circuit material is a ceramic filled PTFE composite for commercial microwave and RF circuits. RO3000 family of products is a circuit board material with electrical characteristics and mechanical stabil...

• August 17. 2022

RT/duroid 5870 Printed Circuit Board Hello everyone, Today, we’re going to talk about high frequency PCB built on RT/duroid 5870 laminates. RT/duroid 5870 is glass microfiber reinforced PTFE composite of Rogers Corporation, which is designed for exacting stripline and microstrip circuit applications. There’re some reasons for using RT/duroid 5870 material. The first one is lowest electrical loss a...