• November 23. 2022

RO3006 High Frequency PCB Rogers RO3006 printed circuit boards are ceramic-filled PTFE composites designed to offer exceptional electrical and mechanical stability at competitive price, intended for use in commercial microwave and RF applications The Rogers RO3006 laminates are polytetrafluoroethylene composites filled with ceramic and created especially for industrial microwave and radio frequenc...

• November 24. 2022

RF and Microwave PCB In comparison to ordinary boards, radio frequency (RF) boards are built to function at frequencies higher than 100 MHz. The PCB industry has been forced to improve its ability to add more circuits to the boards and handle greater frequency ranges by the expanding IOT market. In the PCB sector, we constantly adapt to new trends and technology. We have improved our capabilities ...

• December 01. 2022

What Are Rogers Materials? We shall start this section of the article with defining the Rogers PCB materials. The primary materials used in Rogers PCBs are high frequency and hydrocarbon ceramics. It supports improved production development and has a significant impact. Additionally, it lowers the cost of the printed construction, which allows for continuous heating. As a result, it lessens the el...

• December 06. 2022

RF-10 laminates are designed to offer a cost-effective substrate with acceptable delivery times for the industry. RF-10 fills a requirement for size reduction in RF applications. This kind of 60mil RF-10 substrate is used to construct low loss, high DK PCBs. With a sizable region of immersion gold and a partial green solder mask, it is a double layer build-up. With a high dielectric constant (10.2...

• December 13. 2022

Teflon PTFE PCB High-frequency PCBs using polytetrafluoroethylene (PTFE) as their PCB substrate are known as Teflon PCBs or PTFE PCBs. Teflon PCBs transmit signals at frequencies up to 5 GHz. Dupont Corporation markets its PTFE materials under the Teflon brand name, which is so well-known that people often refer to PTFE substrate PCBs used in microwave and RF applications as Teflon PCBs. Propertie...

• January 04. 2023

As 5G Technology develops, more and more devices request high-performance high-frequency PCBs and RF PCBs that need low signal losses and low electrical noise. Rogers PCB materials are cost-effective and perfectly meets the required technological requirements. Rogers PCB is a type of high-frequency board that raw material is produced by Rogers company. It is different from the conventional PCB boa...