
Call Us Now !
Tel : +86 755 27374946
Order Online Now !
Email : info@bichengpcb.com
TLF-35A is another type of low cost RF material. It's the best choice for low cost, high volume commercial microwave and radio frequency applications.
Item NO.:
BIC-034-v11.0Order(MOQ):
1-10Payment:
T/TProduct Origin:
ChinaColor:
GreenShipping Port:
ShenzhenLead Time:
7-10 daysTaconic RF PCB Made on TLF-35 60mil 1.524mm With Immersion Gold for Mixer, Filters and Couplers etc.
TLF-35A has excellent peel strength for 1/2 ounce and 1 ounce copper (even in comparison to standard epoxy materials), a critical aspect whenever rework is required.
The ultra low moisture absorption rate and low dissipation factor of TLF-35A minimizes phase shift with frequency. TLF-35A is dimensionally stable due to the use of woven fabrics in its design. TLF-35A base materials exhibit flammability of V-0, and are tested in accordance with IPC-TM-650.
TFL-35A has low dielectric constant at 3.5 +/-0.05, low dissipation factor at 0.002.
Benefits:
Low cost
Excellent peel strength
Exceptionally low DF
Low moisture absorption
Very high thermal reliability
Applications:
Filter, coupler, splitter, combiner and mixer
Antenna
High power Amplifier, TMA, TMB, LNA
Repeater
Passive components
Medical scanners
PCB Specifications:
PCB SIZE | 165 x 50mm=1PCS |
BOARD TYPE | Double sided PCB |
Number of Layers | 2 layers |
Surface Mount Components | YES |
Through Hole Components | NO |
LAYER STACKUP | copper ------- 35um(1 oz)+plate TOP layer |
TLF-35 1.524mm | |
copper ------- 35um(1oz) + plate BOT Layer | |
TECHNOLOGY | |
Minimum Trace and Space: | 14 mil / 14 mil |
Minimum / Maximum Holes: | 0.4mm / 2.5mm |
Number of Different Holes: | 0 |
Number of Drill Holes: | 0 |
Number of Milled Slots: | 0 |
Number of Internal Cutouts: | 0 |
Impedance Control: | no |
Number of Gold finger: | 0 |
BOARD MATERIAL | |
Glass Epoxy: | TLF-35 1.524mm |
Final foil external: | 1.5 oz |
Final foil internal: | N/A |
Final height of PCB: | 1.6 mm ±10% |
PLATING AND COATING | |
Surface Finish | Immersion gold |
Solder Mask Apply To: | NO |
Solder Mask Color: | N/A |
Solder Mask Type: | N/A |
CONTOUR/CUTTING | Routing |
MARKING | |
Side of Component Legend | N/A |
Colour of Component Legend | white |
Manufacturer Name or Logo: | Marked on the board in a conductor and leged FREE AREA |
VIA | N/A |
FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
DIMENSION TOLERANCE | |
Outline dimension: | 0.0059" |
Board plating: | 0.0029" |
Drill tolerance: | 0.002" |
TEST | 100% Electrical Test prior shipment |
TYPE OF ARTWORK TO BE SUPPLIED | email file, Gerber RS-274-X, PCBDOC etc |
SERVICE AREA | Worldwide, Globally. |
Data Sheet of Taconic TLF-35:
TLF-35-xxxx-A TYPICAL VALUES | |||||
Property | Test Method | Units | Value | Units | Value |
Dielectric Constant at 1.9GHz | IPC-TM 650 2.5.5.5.1 Mod | 3.50±0.05 | 3.50±0.05 | ||
Dissipation Factor at 1.9GHz | IPC-TM 650 2.5.5.5.1 Mod | 0.0016 | 0.0016 | ||
Dissipation Factor at 10GHz | IPC-TM 650 2.5.5.5.1 Mod | 0.0022 | 0.0022 | ||
Water absorption | IPC-TM 650 2.6.2.1 | % | 0.03 | % | 0.03 |
Peel Strength(1oz copper) | IPC-TM 650 2.4.8 | Lbs./linear inch | 10 | M/mm | 1.8 |
Volume Resistivity | IPC-TM 650 2.5.17.1 | Mohm.cm | 2.0 x 109 | Mohm.cm | 2.0 x 109 |
Surface Resistivity | IPC-TM 650 2.5.17.1 | Mohm | 3.0 x 108 | Mohm | 3.0 x 108 |
Flexural Strength Lengthwise | IPC-TM 650 2.4.4 | psi | 13,000 | M/mm2 | 90 |
Flexural Strength Crosswise | IPC-TM 650 2.4.4 | psi | 13,000 | M/mm2 | 90 |
Thermal Conductivity | IPC-TM 650 2.4.50 | W/m/K | 0.37 | W/m/K | 0.37 |
x-y CTE(50-150℃) | IPC-TM 650 2.4.41 | ppm/℃ | 9-12 | ppm/℃ | 9-12 |
z CTE(50-150℃) | IPC-TM 650 2.4.41 | ppm/℃ | 80 | ppm/℃ | 80 |
Flammability | UL-94 | V-0 | V-0 |
PCB MANUFACTURING PROCESS:
BICHENG PCB WORKSHOP:
BICHENG PCB CERTIFICATE:
Previous:
TLX PCB 2 layer Low DK 2.45 Taconic High Frequency PCB 62mil Immersion SilverNext:
Taconic CER-10 RF Printed Circuit Board 2-Layer CER-10 62mil PCB with Immersion GoldIf you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
Categories
New Products
Rogers 40mil CLTE-XT 1.016mm High Frequency PCB CLTE Woven Glass Reinforced PTFE Microwave PCB
Rogers CLTE-XT High Frequency PCB 9.4mil 25mil 40mil 59mil ceramic filled woven glass reinforced PTFE Circuit Boards
Microwave RF PCB Rogers 20mil 30mil 60mil AD250C Antenna Material Dielectric Constant (DK) of 2.50
IsoClad 917 High Frequency PCB on 20mil (0.508mm) Substrate with Immersion Gold and Green Solder Mask
High Frequency PCB Built on Rogers IsoClad 917 non-woven fiberglass/PTFE Materials
Hybrid PCB Built on SCGA-500 GF265 High Frequency Material and High Tg FR-4 With Immersion Gold
High Frequency PCB Built on Shengyi SCGA-500 GF265 PTFE Glass Reinforced RF Circuit Materials
Rogers DiClad 880 High Frequency PCB Double Layer 20mil 0.508mm With Immersion Gold
© Copyright: 2023 Shenzhen Bicheng Electronics Technology Co., Ltd.. All Rights Reserved.
IPv6 network supported