Call Us Now ! Tel : +86 755 27374946
Order Online Now ! Email : info@bichengpcb.com
There’re 35 μm(1oz) copper on each layer with final height 2.1mm thick. Pads are immersion gold plated.
Item NO.:
BIC-066-v136.0Order(MOQ):
1-10Payment:
T/TProduct Origin:
ChinaColor:
WhiteShipping Port:
ShenzhenLead Time:
7-10 days4 Layer RF Circuit Board On Rogers 60mil RO4350B and 10mil RO4350B with Back Drill for UHF Coupler
(Printed circuit boards are custom-made products, the picture and parameters shown are just for reference)
Hello Everyone,
This 4 layer RF PCB is built on 60mil RO4350B and 10mil RO4350B for the application of UHF coupler. Look at the stack-up.
Base materials are 60mil RO4350B core and 10mil RO4350B core plus 4mil RO4450F prepreg. There’re back drilled via from 10mil core. Back drilling can reduce noise interference and improve signal integrity. Using back drilling successfully reduced the difficulty of PCB fabrication and avoided the use of buried /blind via.
Features and benefits:
1) RO4350B exhibits a stable dielectric constant over a broad frequency range;
2) RO4350B makes it an ideal substrate for broadband applications;
3) Delivery on time higher than 98% on-time-delivery rate;
4) Focusing on small batches and medium volume production;
5) Strict WIP inspection and monitoring as well as working instruction;
Applications:
Antenna, Interference filter, Sound control switch induction, Trunk amplifier
PCB Data Sheet:
PCB SIZE | 91 x 98mm=1PCS |
BOARD TYPE | High Frequency PCB |
Number of Layers | Multilayer PCB, 4 Layer PCB |
Surface Mount Components | YES |
Through Hole Components | YES |
LAYER STACKUP | copper ------- 35um(1oz)+plate TOP layer |
RO4350B 60 mil | |
copper ------- MidLayer 1 | |
RO4450F 4 mil | |
copper ------- MidLayer 2 | |
RO4350B 10 mil | |
copper ------- 35um(1oz)+plate BOT Layer | |
TECHNOLOGY | |
Minimum Trace and Space: | 10mil / 10mil |
Minimum / Maximum Holes: | 0.3/3.21mm |
Number of Different Holes: | 5 |
Number of Drill Holes: | 1680 |
Number of Milled Slots: | 1 |
Number of Internal Cutouts: | 1 |
Impedance Control | no |
BOARD MATERIAL | |
Glass Epoxy: | Rogers RO4350B( core 10mil, DK=3.48) & RO4450B(PP 4mil DK=3.54) |
Final foil external: | 1.5oz |
Final foil internal: | 1oz |
Final height of PCB: | 2.1mm ±10% |
PLATING AND COATING | |
Surface Finish | Immersion Gold (71.1%) 2µ" over 100µ" nickel |
Solder Mask Apply To: | Top and Bottom layer |
Solder Mask Color: | N/A |
Solder Mask Type: | N/A |
CONTOUR/CUTTING | Routing |
MARKING | |
Side of Component Legend | N/A |
Colour of Component Legend | N/A |
Manufacturer Name or Logo: | N/A |
VIA | Plated Through Hole(PTH), via open |
FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
DIMENSION TOLERANCE | |
Outline dimension: | 0.0059" (0.15mm) |
Board plating: | 0.0030" (0.076mm) |
Drill tolerance: | 0.002" (0.05mm) |
TEST | 100% Electrical Test prior shipment |
TYPE OF ARTWORK TO BE SUPPLIED | email file, Gerber RS-274-X, PCBDOC etc |
SERVICE AREA | Worldwide, Globally. |
BICHNEG PCB WORKSHOP:
BICHNEG PCB CERTIFICATION:
BICHENG PCB MAIN COURIERS:
Previous:
Taconic High Frequency PCB Built On TLY-3 30mil 0.762mm With Immersion GoldNext:
TLY-5Z High Frequency PCB 60mil 30mil 20mil and 10mil Taconic RF PCB with Immersion GoldIf you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
Categories
New Products
Rogers RO3203 PCB 60mil 1.524mm Double sided High Frequency Circuit Material
F4BTMS350 PCB 6.35mm Thick F4B DK 3.5 with HASL Circuit Board
FR408HR PCB Isola 2.0mm Thick 4-layer Multilayer High TG Material Circuit Board
Rigid-flex PCB S1000-2M+Panasonic R-F777 Polyimide +FR4 Material
RO4003C LoPro PCB 60.7mil Rogers 4003C Low Profile with Immersion Gold Printed Circuit Board
RF-60A PCB Taconic 25mil 2-layer Rigid High Frequency Board with Immersion Tin
© Copyright: 2024 Shenzhen Bicheng Electronics Technology Co., Ltd.. All Rights Reserved.
IPv6 network supported