
Call Us Now !
Tel : +86 755 27374946
Order Online Now !
Email : info@bichengpcb.com
Rogers' TMM 13i thermoset microwave laminates are ceramic, hydrocarbon, thermoset polymer composites designed for high PTH reliability stripline and microstrip applications. It has the dielectric constant of 12.85 and dissipation factor of 0.0019
Item NO.:
BIC-159-v126.0Order(MOQ):
1-10Payment:
T/TProduct Origin:
ChinaColor:
WhiteShipping Port:
ShenzhenLead Time:
7-10 daysRogers TMM13i High Frequency Printed Circuit Board 15mil 20mil 25mil 60mil High DK 12.85 RF PCB With Immersion Gold
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
General Description:
TMM 13i has an exceptionally low thermal coefficient of dielectric constant. Its isotropic coefficients of thermal expansion is very closely matched to copper which results in production of high reliability plated through holes, and low etch shrinkage values. Furthermore, the thermal conductivity of TMM13i is approximately twice that of traditional PTFE/ceramic laminates, facilitating heat removal.
Since TMM13i material is based on thermoset resins, and do not soften when heated. So wire bonding of component leads to circuit traces can be performed without concerns of pad lifting or substrate deformation.
Typical Applications:
1. Chip testers
2. Dielectric polarizers and lenses
3. Filters and coupler
4. Global Positioning Systems Antennas
5. Patch Antennas
6. Power amplifiers and combiners
7. RF and microwave circuitry
8. Satellite communication systems
Our PCB Capability(TMM13i):
PCB Capability (TMM13i) | |
PCB Material: | Ceramic, Hydrocarbon, Thermoset Polymer Composites |
Designation: | TMM13i |
Dielectric constant: | 12.85 |
Layer count: | Double Layer, Multilayer, Hybrid PCB |
Copper weight: | 0.5oz (17 µm), 1oz (35µm), 2oz (70µm) |
PCB thickness: | 15mil (0.381mm), 20mil (0.508mm), 25mil (0.635mm), 30mil(0.762mm), 50mil (1.27mm), 60mil (1.524mm), 75mil(1.905mm), 100mil (2.54mm), 125mil (3.175mm), 150mil (3.81mm), 200mil (5.08mm), 250mil (6.35mm), 275mil (6.985mm), 300mil (7.62mm), 500mil (12.7mm) |
PCB size: | ≤400mm X 500mm |
Solder mask: | Green, Black, Blue, Yellow, Red etc. |
Surface finish: | Bare copper, HASL, ENIG, OSP, Immersin tin, Immersion silver, Pure gold plated etc.. |
Why Choose Us?
1.ISO9001, ISO14001, IATF16949, ISO13485, UL Certified;
2.More than 18+ years’ high frequency PCB experience;
3.Small quantity order is available, no MOQ required;
4.We’re a Team of passion, discipline, responsibility and honesty;
5.Delivery on time: >98%, Customer complaint rate: <1%
6.16000㎡ workshop, 30000㎡ output a month and 8000 types of PCB's a month;
7.Powerful PCB capabilities support your research and development, sales and marketing;
8.IPC Class 2 / IPC Class 3
Typical Value of TMM13i:
TMM13i Typical Value | ||||||
Property | TMM13i | Direction | Units | Condition | Test Method | |
Dielectric Constant,εProcess | 12.85±0.35 | Z | 10 GHz | IPC-TM-650 2.5.5.5 | ||
Dielectric Constant,εDesign | 12.2 | - | - | 8GHz to 40 GHz | Differential Phase Length Method | |
Dissipation Factor (process) | 0.0019 | Z | - | 10 GHz | IPC-TM-650 2.5.5.5 | |
Thermal Coefficient of dielectric constant | -70 | - | ppm/°K | -55℃-125℃ | IPC-TM-650 2.5.5.5 | |
Insulation Resistance | >2000 | - | Gohm | C/96/60/95 | ASTM D257 | |
Volume Resistivity | - | - | Mohm.cm | - | ASTM D257 | |
Surface Resistivity | - | - | Mohm | - | ASTM D257 | |
Electrical Strength(dielectric strength) | 213 | Z | V/mil | - | IPC-TM-650 method 2.5.6.2 | |
Thermal Properties | ||||||
Decompositioin Temperature(Td) | 425 | 425 | ℃TGA | - | ASTM D3850 | |
Coefficient of Thermal Expansion - x | 19 | X | ppm/K | 0 to 140℃ | ASTM E 831 IPC-TM-650, 2.4.41 | |
Coefficient of Thermal Expansion - Y | 19 | Y | ppm/K | 0 to 140℃ | ASTM E 831 IPC-TM-650, 2.4.41 | |
Coefficient of Thermal Expansion - Z | 20 | Z | ppm/K | 0 to 140℃ | ASTM E 831 IPC-TM-650, 2.4.41 | |
Thermal Conductivity | - | Z | W/m/K | 80℃ | ASTM C518 | |
Mechanical Properties | ||||||
Copper Peel Strength after Thermal Stress | 4.0 (0.7) | X,Y | lb/inch (N/mm) | after solder float 1 oz. EDC | IPC-TM-650 Method 2.4.8 | |
Flexural Strength (MD/CMD) | - | X,Y | kpsi | A | ASTM D790 | |
Flexural Modulus (MD/CMD) | - | X,Y | Mpsi | A | ASTM D790 | |
Physical Properties | ||||||
Moisture Absorption (2X2) | 1.27mm (0.050") | 0.16 | - | % | D/24/23 | ASTM D570 |
3.18mm (0.125") | 0.13 | |||||
Specific Gravity | 3 | - | - | A | ASTM D792 | |
Specific Heat Capacity | - | - | J/g/K | A | Calculated | |
Lead-Free Process Compatible | YES | - | - | - | - |
BICHNEG PCB WORKSHOP:
BICHNEG PCB CERTIFICATION:
BICHENG PCB MAIN COURIERS:
Previous:
Rogers 5880LZ High Frequency RT/duroid 5880LZ 50mil 1.27mm 2-Layer Immersion Gold PCBNext:
TC600 High Frequency PCB 50mil 1.27mm Double Sided Microwave Circuit Board With Immersion SilverIf you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
Categories
New Products
RO3210 25mil 0.635mm PCB 2-Layer Rogers 3210 High Frequency Board for RF Antenna Microwave
RT/duroid 6002 25mil 0.635mm Rogers 6002 Rigid PCB for Microwave Radar Aerospace
TLX-6 Taconic 60mil 1.524mm RF Antenna High Frequency PCB Immersion Gold Finish
RO4003C LoPro PCB 20.7mil 0.526mm Material Rogers 4003C 2-Layer Rigid Board ENIG Surface Finish
RT/duroid 5880 High-frequency Laminate 1.575mm 2-layers Rogers 5880 62mil material Immersion Gold Circuit Board
Hybrid PCB Rogers RO4350B FR-4 High Tg 170°C Materials 6 Layers Multiplayer Mixed Circuit Board
Shengyi FR-4 S1000-2M Tg170°C Panasonic R-F777 Polyimide 4-Layer Rigid-Flex PCB
60 mil Rogers RO4003C Circuit Board 2-layer Rigid High Frequency Material PCB
© Copyright: 2023 Shenzhen Bicheng Electronics Technology Co., Ltd.. All Rights Reserved.
IPv6 network supported