Taconic RF-10 PCB 2-layer 10mil 0.254mm Dk10.0 High DK Immersion Gold Board

TaconicRF-10 PCB 2-layer 10mil 0.254mm Dk10.0 High DK Immersion Gold Board

Introduction

The RF-10 2-layer 10mil PCB is a high-performance printed circuit board designed for radio frequency (RF) and microwave applications. Utilizing RF-10 laminate, this Taconic PCB offers exceptional electrical properties, thermal stability, and signal integrity, making it ideal for high-frequency circuits. With immersion gold (ENIG) surface finish, it ensures excellent solderability and corrosion resistance.

This Taconic RF-10 PCB is manufactured under IPC-Class-2 quality standards, ensuring reliability for commercial and industrial applications. Its ultra-thin 0.3mm thickness and tight tolerances make it suitable for compact RF designs, including antennas, filters, and satellite components.

Below, we provide a detailed breakdown of the PCB’s construction, stackup, statistics, and key benefits.

PCB Construction Details

The following table summarizes the key structural and manufacturing specifications of the RF-10 PCB:

PCB Stackup

The 2-layer stackup is optimized for RF signal integrity with a 10mil RF-10 core. Below is the detailed stackup structure:

PCB Statistics

The following table outlines the component and connectivity details of the PCB:

RF-10 Laminate: Key Features & Benefits

1. Material Properties

RF-10 Taconic RF PCB Circuit Board is a ceramic-filled PTFE (Teflon) laminate with woven fiberglass reinforcement, offering:

• Dielectric Constant (Dk): 10.2±0.3 @ 10GHz (enables compact RF circuit design)
• Dissipation Factor (Df): 0.0025 @ 10GHz (minimizes signal loss)
• Thermal Conductivity: 0.85 W/mK (improves heat dissipation)
•  Low CTE (Coefficient of Thermal Expansion):
• X/Y: 16/20 ppm/°C
• Z: 25 ppm/°C (enhances dimensional stability)
• Moisture Absorption: 0.08% (resists humidity effects)
• Flammability Rating: UL 94 V-0 (fire-resistant)

2. Advantages of RF-10 in PCB Design

✔High Dk for Miniaturization–Enables smaller RF circuits without performance loss.

✔Low Signal Loss–Ideal for high-frequency (microwave/mmWave) applications.

✔Thermal Management–Better heat dissipation than standard FR4.

✔Stable Dk Tolerance (±0.3)–Ensures consistent RF performance.

✔Smooth Copper Adhesion–Reduces insertion loss at high frequencies.

✔Cost-Effective–Balances performance and affordability.

Applications

The RF-10 Taconic High Frequency PCB is widely used in:

• Microstrip Patch Antennas
• GPS & RFID Antennas
• Passive RF Components (Filters, Couplers, Power Dividers)
• Aircraft Collision Avoidance Systems
• Satellite & Aerospace Electronics
• 5G & mmWave Communication Devices

Manufacturing & Quality Assurance

• Artwork Format: Gerber RS-274-X
• Quality Standard: IPC-Class-2 (meets commercial electronics reliability)
• Electrical Testing: 100% tested before shipment
• Global Availability: Shipped worldwide

Conclusion

The RF-10 PCB (2-layer, 10mil Immersion Gold) is a high-frequency optimized circuit board with excellent electrical and thermal properties. Its ultra-thin profile, tight tolerances, and ENIG finish make it ideal for RF/microwave applications where signal integrity and miniaturization are critical.

With RF-10’s low-loss dielectric properties, this Taconic Immersion Gold PCB ensures superior performance in antennas, filters, and satellite systems. Manufactured under strict IPC standards, it guarantees reliability for commercial and industrial use.

For high-frequency PCB solutions, the RF-10 PCB stands out as a cost-effective, high-performance choice.