
Call Us Now !
Tel : +86 755 27374946
Order Online Now !
Email : info@bichengpcb.com
RO4534 High Frequency Laminates are ceramic-filled,
glass-reinforced hydrocarbon based material which are cost/performance
materials from Rogers Corporation.
Item NO.:
BIC-187-v109.0Order(MOQ):
1-10Payment:
T/TProduct Origin:
ChinaColor:
WhiteShipping Port:
ShenzhenLead Time:
7-10 daysRogers RO4534 High Frequency Printed Circuit Board 20mil 30mil 60mil Antenna PCB With Immersion Gold and Immersion Tin
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
General Description:
RO4534 High Frequency Laminates are ceramic-filled, glass-reinforced hydrocarbon based material which are cost/performance materials from Rogers Corporation, specifically engineered and manufactured to meet the specific demands of the antenna markets. It has a dielectric constant of 3.4 and a loss tangent (Df) of 0.0027 measured at 10 GHz. These values allow antenna designers to realize substantial gain values while minimizing signal loss. Thus, it provides excellent passive intermodulation response required for mobile infrastructure microstrip antenna applications.
It is an affordable alternative to more conventional PTFE antenna technologies, thus allowing our designers to optimize the price and performance of the antennas. The resin systems of RO4534 dielectric materials are designed to provide the necessary properties for ideal antenna performance. The coefficients of thermal expansion (CTEs) in both the X and Y directions are similar to that of copper. The good CTE match reduces stresses in the printed circuit board antenna.
Features and Benefits:
1. Low Loss 0.0027 , Low Dk 3.4, low PIM response: Wide range of application use
2. Thermoset resin system: Compatible with standard PCB fabrication
3. Excellent dimensional stability: Greater yield on larger panels sizes
4. Uniform mechanical properties: Maintains mechanical form during handling
5. High thermal conductivity: Improved power handling
Typical Applications:
1. Cellular infrastructure base station antennas
2. WiMAX antenna networks
Our PCB Capability (RO4534):
PCB Capability (RO4534) | |
PCB Material: | Ceramic-filled, Glass-reinforced Hydrocarbon |
Designation: | RO4534 |
Dielectric constant: | 3.4 |
Dissipation Factor | 0.0027 10GHz |
Layer count: | Double Sided PCB, Multilayer PCB, Hybrid PCB |
Copper weight: | 0.5oz (17 µm), 1oz (35µm), 2oz (70µm) |
PCB thickness: | 20mil (0.508mm), 30mil (0.762mm), 60mil (1.524mm ) |
PCB size: | ≤400mm X 500mm |
Solder mask: | Green, Black, Blue, Yellow, Red etc. |
Surface finish: | Bare copper, HASL, ENIG, Immersion silver, Immersion tin, OSP, Pure gold plated etc.. |
RO4534 Typical Values:
Property | RO4534 | Direction | Units | Condition | Test Method |
Dielectric Constant, er Process | 3.4 ± 0.08 | Z | - | 10 GHz/23℃2.5 GHz | IPC-TM-650,2.5.5.5 |
Dissipation Factor | 0.0022 | Z | - | 2.5 GHz/23℃ | IPC-TM-650, 2.5.5.5 |
0.0027 | 10 GHz/23℃ | ||||
PIM (Typical) | -157 | - | dBc | Reflected 43 dBm swept tones | Summitek 1900b PIM Analyzer |
Dielectric Strength | >500 | Z | V/mil | 0.51 mm | IPC-TM-650, 2.5.6.2 |
Dimensional Stability | <0.3 | X,Y | mm/m (mils/inch) | after etch | IPC-TM-650, 2.4.39A |
Coefficient of Thermal Expansion | 11 | X | ppm/℃ | -55 to 288℃ | IPC-TM-650, 2.4.41 |
14 | Y | ||||
46 | Z | ||||
Thermal Conductivity | 0.6 | - | W/(m.K) | 80℃ | ASTM C518 |
Moisture Absorption | 0.06 | - | % | D48/50 | IPC-TM-650, 2.6.2.1 ASTM D570 |
Tg | >280 | - | ℃TMA | A | IPC-TM-650, 2.4.24.3 |
Density | 1.8 | - | gm/cm3 | - | ASTM D792 |
Copper Peel Strength | 6.3(1.1) | - | lbs/in (N/mm) | 1 oz. EDC post solder float | IPC-TM-650, 2.4.8 |
Flammability | NON FR | - | - | - | UL 94 |
Lead-Free Process Compatible | Yes | - | - | - | - |
BICHNEG PCB WORKSHOP:
BICHNEG PCB CERTIFICATION:
BICHENG PCB MAIN COURIERS:
Previous:
RO4533 High Frequency Printed Circuit Board Rogers 20mil 30mil 60mil Antenna RF PCBNext:
Rogers RO4535 High Frequency PCB 60mil 30mil 20mil Antenna PCB with Immersion Gold, Silver and TinIf you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
Categories
New Products
Rogers 40mil CLTE-XT 1.016mm High Frequency PCB CLTE Woven Glass Reinforced PTFE Microwave PCB
Rogers CLTE-XT High Frequency PCB 9.4mil 25mil 40mil 59mil ceramic filled woven glass reinforced PTFE Circuit Boards
Microwave RF PCB Rogers 20mil 30mil 60mil AD250C Antenna Material Dielectric Constant (DK) of 2.50
IsoClad 917 High Frequency PCB on 20mil (0.508mm) Substrate with Immersion Gold and Green Solder Mask
High Frequency PCB Built on Rogers IsoClad 917 non-woven fiberglass/PTFE Materials
Hybrid PCB Built on SCGA-500 GF265 High Frequency Material and High Tg FR-4 With Immersion Gold
High Frequency PCB Built on Shengyi SCGA-500 GF265 PTFE Glass Reinforced RF Circuit Materials
Rogers DiClad 880 High Frequency PCB Double Layer 20mil 0.508mm With Immersion Gold
© Copyright: 2023 Shenzhen Bicheng Electronics Technology Co., Ltd.. All Rights Reserved.
IPv6 network supported